для начала ставим на ваш смарт DosBox /threadnav109730-1-10-dosbox.html качаем Windows 3.1 (с описанием) в папке Data на смарте открываем конфиг DosBoxa и меням содержимое на Code: # DOSBOX for s60 edited by Martin-prv [sdl] # orientation -- used to set orientation on s60 devices # normal -- use for landscape display devices # cw -- (clockwise) use for portrait display devices (right handed button usage) # ccw -- (counter-clockwise) use for portrait display devices (left handed button usage) # fullscreen -- Start dosbox directly in fullscreen. # fulldouble -- Use double buffering in fullscreen. # fullresolution -- What resolution to use for fullscreen: original or fixed size (e.g. 1024x768). # windowresolution -- Scale the window to this size IF the output device supports hardware scaling. # output -- What to use for output: surface,overlay,opengl,openglnb,ddraw. # autolock -- Mouse will automatically lock, if you click on the screen. # sensitiviy -- Mouse sensitivity. # waitonerror -- Wait before closing the console if dosbox has an error. # priority -- Priority levels for dosbox: lowest,lower,normal,higher,highest,pause (when not focussed). # Second entry behind the comma is for when dosbox is not focused/minimized. # mapperfile -- File used to load/save the key/event mappings from. # usescancodes -- Avoid usage of symkeys, might not work on all operating systems. # keyhint -- When set to true, the first button press will display a hint about what # key you will get with the second button press. # If the key you want isn't there you can cancel by pressing cross. orientation=cw #fullscreen=true fulldouble=false fullresolution=320x240 windowresolution=320x240 output=surface autolock=true sensitivity=50 waitonerror=true priority=higher,normal mapperfile=mapper.txt #usescancodes=true keyhint=false [dosbox] # language -- Select another language file. # memsize -- Amount of memory dosbox has in megabytes. # machine -- The type of machine tries to emulate:hercules,cga,tandy,pcjr,vga. # captures -- Directory where things like wave,midi,screenshot get captured. language= machine=vga #captures=capture memsize=2 [render] # frameskip -- How many frames dosbox skips before drawing one. # aspect -- Do aspect correction, if your output method doesn't support scaling this can slow things down! # scaler -- Scaler used to enlarge/enhance low resolution modes. # Supported are none,normal2x,normal3x,advmame2x,advmame3x,hq2x,hq3x,2xsai,super2xsai,supereagle, # advinterp2x,advinterp3x,tv2x,tv3x,rgb2x,rgb3x,scan2x,scan3x. frameskip=1 aspect=true scaler=normal2x [cpu] # core -- CPU Core used in emulation: normal,simple,dynamic,auto. # auto switches from normal to dynamic if appropriate. # cycles -- Amount of instructions dosbox tries to emulate each millisecond. # Setting this value too high results in sound dropouts and lags. # You can also let DOSBox guess the correct value by setting it to max. # The default setting (auto) switches to max if appropriate. # cycleup -- Amount of cycles to increase/decrease with keycombo. # cycledown Setting it lower than 100 will be a percentage. #core=dynamic #cycles=sync #cycleup=2500 #cycledown=400 #autocycle=true #mincycles=600 #maxcycles=3000 core=dynamic cycles=3000 [mixer] # nosound -- Enable silent mode, sound is still emulated though. # rate -- Mixer sample rate, setting any devices higher than this will # probably lower their sound quality. # blocksize -- Mixer block size, larger blocks might help sound stuttering # but sound will also be more lagged. # prebuffer -- How many milliseconds of data to keep on top of the blocksize. nosound=false rate=22050 blocksize=2048 prebuffer=10 [midi] # mpu401 -- Type of MPU-401 to emulate: none, uart or intelligent. # device -- Device that will receive the MIDI data from MPU-401. # This can be default,alsa,oss,win32,coreaudio,none. # config -- Special configuration options for the device. In Windows put # the id of the device you want to use. See README for details. mpu401=none device=default config= [sblaster] # sbtype -- Type of sblaster to emulate:none,sb1,sb2,sbpro1,sbpro2,sb16. # sbbase,irq,dma,hdma -- The IO/IRQ/DMA/High DMA address of the soundblaster. # mixer -- Allow the soundblaster mixer to modify the DOSBox mixer. # oplmode -- Type of OPL emulation: auto,cms,opl2,dualopl2,opl3. # On auto the mode is determined by sblaster type. # All OPL modes are 'Adlib', except for CMS. # oplrate -- Sample rate of OPL music emulation. sbtype=sb1 sbbase=220 irq=7 dma=1 hdma=5 mixer=true oplmode=auto oplrate=22050 [gus] # gus -- Enable the Gravis Ultrasound emulation. # gusbase,irq1,irq2,dma1,dma2 -- The IO/IRQ/DMA addresses of the # Gravis Ultrasound. (Same IRQ's and DMA's are OK.) # gusrate -- Sample rate of Ultrasound emulation. # ultradir -- Path to Ultrasound directory. In this directory # there should be a MIDI directory that contains # the patch files for GUS playback. Patch sets used # with Timidity should work fine. gus=false gusrate=22050 gusbase=240 irq1=5 irq2=5 dma1=3 dma2=3 ultradir=C:\ULTRASND [speaker] # pcspeaker -- Enable PC-Speaker emulation. # pcrate -- Sample rate of the PC-Speaker sound generation. # tandy -- Enable Tandy Sound System emulation (off,on,auto). # For auto Tandysound emulation is present only if machine is set to tandy. # tandyrate -- Sample rate of the Tandy 3-Voice generation. # disney -- Enable Disney Sound Source emulation. Covox Voice Master and Speech Thing compatible. pcspeaker=true pcrate=22050 tandy=off tandyrate=22050 disney=false [joystick] joysticktype=none [serial] serial1=dummy serial2=dummy serial3=disabled serial4=disabled [dos] # xms -- Enable XMS support. # ems -- Enable EMS support. # umb -- Enable UMB support. # keyboardlayout -- Language code of the keyboard layout (or none). xms=true ems=true umb=true keyboardlayout=none [ipx] # ipx -- Enable ipx over UDP/IP emulation. ipx=false [autoexec] # Lines in this section will be run at startup. # Loader 1 -- Windows 3.1 # mount a e:\Data\win31\ (To install more drivers) mount c e:\Data\ mount d e:\ c: c:\Windows\win.com # Loader 2 -- Norton Commander 5.0 # mount c e:\Data\ # mount d e:\ # c: # c:\Data\nc\nc.exe из распаковавшегося (скачаного) архива копируем содержимое из папки Data на наш смарт- картa памяти - Data запускаем наш DosBox если позволяет оператива (40+ мб) можно поставить 95 винду или же попробовать 98...